LEDs and Resistors
This order is for ten 5mm diffused LEDs and ten 1000 ohm resistors. You can chose between ten RED or ten BLUE LEDs. You can add these to your breadboard project. The LEDs have two legs and those have two different lengths. Since LEDs are diodes they only allow current to flow in one direction and not the other. The LONGER leg goes to the POSITIVE side of you design. It is also very important to limit the current flow through your LEDs, so we are adding ten 1000 ohm resistors with this order. To use them, you place the resistor in series with your LED. It does not matter which side you place the resistor on.